![]() ![]() Called null points, these points are the location where there are no tracking errors and the cartridge aligns perfectly in the record grooves. ![]() ![]() With a pivoted tonearm, there are only going to be two points along the arc that provides perfect tangency. If you are using a two-point cartridge protractor, you are going to find that the different points used vary based on whether you have a pivoted tonearm or a straight one. You don’t actually want the needle to touch the protractor, just be parallel to the grid lines so that you can offset the angle as needed. Hold the sides of the cartridge so that you can rotate the counterweight just enough for the entire tonearm to look like it is floating right above the turntable platter. ![]() To do this, you can move the tonearm by the cueing lever. When lowering the tonearm, you will want to do it with care so that the needle does not get damaged in the process. Once the protractor is in place, it will lay on the platter just like a record so that you can easily measure and align the cartridge body. This step is actually very simple to do because there is a mark or a spindle hole on the protractor goes on the spindle of your record player. Step 1: Place the Protractor over the Turntable Spindle Print our downloadable turntable protractor to get started. Let’s take a look at how to adjust the overhang alignment geometry using a two-point protractor, which is a universal model. Regardless of the one that you use, the process for each is basically done the same way. There are also universal phono cartridge alignment protractors that will work for any type of cartridge mounting. There are cartridge-specific protractors that work to align specific types of cartridges. Steps to Line up Your Turntable Protractor If the paper that you print on is slightly off the scale of the effective length of the protractor, then the alignment could be inaccurate. However, there are also downloadable templates that you can find online and use.Īll you will need to do with a printable turntable protractor is make sure that it is the correct size as the reference scale. Cartridge alignment tools like Pro-Ject’s Align It DS2 are easy to use. If the tracking errors remain, the stylus tip will begin to wear unevenly, creating more distortion during playback. Not adjusting the stylus alignment degrades the sound that you hear over time. Doing this will stabilize the tonearm and help keep it from skipping during playback. Why do you need a cartridge alignment protractor for your turntable? Not only does it provide turntable cartridge alignment, it will give you precise alignment so that you don’t have to constantly adjust the cartridge stylus and the cantilever of the turntable. However, there is an alignment tool, called a turntable protractor, used to adjust the tracking force and the alignment of the turntable phono cartridge. When this misalignment begins to occur, the hi-fi sound that you love will quickly diminish. The sound quality will decrease during playback allowing you to hear a muffled or muddy sound as the tonearm moves the stylus along the inner grooves of the vinyl. When you are listening to your vinyl records, any audiophile will notice when their cartridge alignment is out of whack. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |